2-Channel Isolated RS232 Expansion HAT For Raspberry Pi, SC16IS752+SP3232 Solution, With Multi Onboard Protection Circuits
Overview
This is a 2-channel isolated RS232 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3232 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
It is easy to control the 2-channel RS232 via SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation.
Features
-
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
-
Adopts SC16IS752+SP3232 dual chip combination, converts SPI to RS232, data rate up to 921600bps
-
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
-
Onboard LEDs for indicating the power and transceiver status
-
Breakout SPI control pins, for connecting with host control boards like Arduino
-
Comes with development resources and manual (examples in C and Python)
Specifications
-
UART expansion chip: SC16IS752
-
RS232 transceiver: SP3232
-
Communication interface: SPI
-
Data rate: 300 ~ 921600 bps
-
Operating voltage: 3.3V / 5V
-
Dimensions: 65mm × 56.5mm
-
Mounting hole size: 3.0mm
What’s on Board
-
SC16IS752 UART expansion chip
-
SP3232 RS232 transceiver
-
ADUM1412 digital isolator
-
B0505LS power supply isolation module
-
RT9193-33 power chip
-
Raspberry Pi GPIO connector:for connecting Raspberry Pi
-
MCU control header:for connecting host control boards like Arduino
-
RS232 connector:2 channels RS232 interface (RS232 9PIN male)
-
Transient suppress diode array
-
ESD protection two-way diode
-
Serial port status indicator
RXD1/TXD1: channel 1 transceiving indicator
RXD2/TXD2: channel 2 transceiving indicator -
Power indicator
-
Interrupt pin switch
The interrupt pin IRQ is connected to P5 (BCM P24) by default
Changeable via 0R resistor
Example
Note: the Raspberry Pi and serial cables are NOT included.
Pinouts
PIN |
RASPBERRY PI (BCM) |
DESCRIPTION |
VCC |
5V |
3.3V/5V power supply |
GND |
GND |
Ground |
SCK |
P21 (SPI1 SCLK) |
SPI clock input |
MOSI |
P20 (SPI1 MOSI) |
SPI data input |
MISO |
P19 (SPI1 MISO) |
SPI data output |
CS |
P18 (SPI1 CS) |
SPI chip select |
IRQ |
P24 |
Interrupt output |
Dimension
How to use: Please refero to : www.waveshare.com/wiki/2-CH_RS232_HAT
Weight: 0.039KG approx
Note: this HAT doesn’t come with any serial cable, you may also want to pick up the following cables for easy use:
-
Serial Cable Dual Female Crossover: for connecting RS232 devices with male connector, OR for self transceiving test of the HAT’s 2 channels RS232
-
Serial Cable Male to Female Straight Through: for connecting RS232 devices with female connector
Packing List:
1 x 2-CH RS232 HAT
1 x 2x20PIN female pinheader
1 x RPi screws pack (2pcs)
(not include Raspberry Pi and cable)
Reviews
There are no reviews yet.