3.5 inch Raspberry Pi 4 Model B Touch Screen 480×320 LCD optional 5/50FPS| Acrylic Case for Raspberry Pi 4

3.5 inch Raspberry Pi 4 Model B Touch Screen 480×320 LCD optional 5/50FPS| Acrylic Case for Raspberry Pi 4

Introduction :

This is the 3.5 inch touch screen for Raspberry Pi 4 . There are 5 FPS and 50 FPS to choose according to your need. The screen can install on the acrylic with Raspberry Pi ( need to remove the cover ). When you don’t use the 3.5 inch screen , you can install the cooling fan on the cover ( this link does not include fan ).

About the 3.5 inch touch screen

1. 5FPS type (bundle 1 and bundle 3 ):
(1). 320×480 resolution
(2). Resistive touch control
(3). Supports any revision of Raspberry Pi (directly-pluggable)
(4). Compatible with Raspberry Pi 4.
(5).Drivers provided (works with your own Raspbian/Ubuntu )
(6). Size perfectly fits the Raspberry Pi
(7). Supports Raspbian system, ubuntu system ,kali Linux system

2. 50FPS type ( bundle 2 and bundle 4 ) :
(1). Physical resolution 320 x 480, with resistive touch control
(2). It supports up to 125MHz SPI signal input, showing stable no screen and no flicker
(3). With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure
(4). Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom
(5). Same size as the Raspberry Pi, compatible for Raspberry Pi 4.
(6). Support Raspbian/Ubuntu/Kali system, provide driver and image.

How to use the screen :

Step 1：Download the Raspbian image
https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image
https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3

Step 3: Open terminal(SSH) and install the driver on RaspberryPi

You can also download the system image by this link:
https://mega.nz/#!Ojp2ACyI!dn4Gt5OibU2pzN9AvwzQXg4PSSYmh3mMxXnvgNVbgT0

Run:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

Wait a few minutes, when the system reboot it will be ok.

Please use our recommended system for touch screen. If you use other systems, it may not have touch function or may not work. You need to configure it yourself. Because there are many systems that the Raspberry Pi can use, we can’t make every system compatible with our touch screen.

About the case :

1. Made by acrylic , reduce the blocking of WiFi and bluetooth signal.
2. To preotective the acrylic from scratched , there is a layer of protective film on the surface. Please remove it before use.
3. It is a dual using way case :
(1). You can use it to install the Raspberry Pi 4 with 3.5 inch screen , but need to remove the cover.
(2). When you don’t use the 3.5 inch screen , you can add the cover as a normal case , then you can also install the cooling fan on the cover (we don’t provide the fan in this link )

Packing List :

Bundle 1 :

1 x 3.5 inch Touch Screen (5FPS)
1 x Acrylic Case
1 x Stylus

Bundle 2 :

1 x 3.5 inch Touch Screen (50FPS)
1 x Acrylic Case
1 x Stylus

Bundle 3 :

1 x 3.5 inch Touch Screen (5FPS)
1 x Stylus

Bundle 4 :

1 x 3.5 inch Touch Screen (50FPS)
1 x Acrylic Case
1 x Stylus