100w solar panel power generation system, ETFE material panel, for 12v 24v battery power generation.
Package : ETFE 100W system DC
1, ETFE Flexible solar panel 100w,1pcs; size: 1050MM*540MM*2.5MM.
2, 10A, 12V/24V Auto lcd pwm solar charge controller; 1pcs
3, 1 Set 3M Extension Solar Cablefor rechargeable battery
4, 1 Set 3m solar battery cable with alligator
Electrical Specification
Performance Under Standard Test Conditions(STC*) |
|
Maximum power |
Pmax |
100 Wp |
Open circuit voltage |
Voc |
20 V |
Maximum power point voltage |
Vmpp |
18.02 V |
Short-circuit current |
I sc |
5.95 A |
Maximum power point current |
I mpp |
5.55 A |
Minor reduction in efficiency under partial load conditions at 25degC: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved.
Component Material |
|
Cells per module |
32 |
Cell dimensions |
125mm*125mm |
Cell type |
Monocrystalline Silicon |
Front |
tempered glass (EN12150) |
System Intergration Technician |
|
Maximum system voltage SC |
1000 V |
Maximum reverse current |
10 A |
Maximum system voltage |
600 V |
Increased snowload acc. to IEC 61215 |
5.4 kN/msup2; |
Thermak Characteristics |
|
NOCT |
47 degC |
TC Voc |
-0.33 %/degC |
TC Isc |
0.042 %/degC |
TC Pmpp |
-0.45 %/degC |
Extra Specification |
|
PTC rating |
100 W |
Module efficiency |
17.0% |
Junction box |
IP67 |
Plus-Sorting* |
Pflash ge Pmax |
Connector |
male and female |
Power tolerance* |
+/- 5 % |
100W OR 200W Spare Part:
PWM Solar Controller 12V/24V Auto(SupportLithium iron phosphate battery)
Controller Type is Random, pls notice.
MODEL |
10A |
20A |
30A |
40A |
50A |
60A |
Battery Voltage |
12V 24V Auto |
|||||
Charging Current |
10A |
20A |
30A |
40A |
50A |
60A |
Discharging Current |
10A |
10A |
10A |
20A |
30A |
30A |
Max Solar input |
48V(for 24V battery) 24V(for 12V battery) |
|||||
Equalization |
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) |
|||||
Float charge |
13.7V(defaul,adjustable) |
|||||
Discharge stop |
10.7V(defaul,adjustable) |
|||||
Discharge reconnect |
12.6V(defaul,adjustable) |
|||||
Charge reconnect |
13V |
|||||
Voltage of open light |
Solar Panel 8V(Light lights delay) |
|||||
Voltage of close light |
Solar Panel 8V(Light off delay) |
|||||
USB output |
5V/3A |
|||||
Self-consume |
<10mA |
|||||
Operating temperature |
-35°C~+60°C |
|||||
Size |
133.5*70*35mm |
188*90*47mm |
*all red color voltage X2 ,while using 24V system.
Connection
1.Connect the battery to the charge regulator – plus and minus.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
3M SOLAR CABLE WITH ALLIGATOR
3M SOLAR CABLE; RED+BLACK
n
n
flexible solar pan
Factory Inside Photo
Reviews
There are no reviews yet.