Artillery Sidewinder SWX2 3D Printer with Auto Leveling, Self-Develops 32-bits Motherboard, Phenomenally Quiet TMC2209s…

SPECIFICATION
Layer Resolution:0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament:PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Machine Dimensions: 550 x 405 x 640 mm
550 x 405 x 870 mm (with spool holder)
21.65 x 15.94 x 25.20 in
21.65 x 15.94 x 34.25 in (with spool holder)
Shipping Box Dimensions: 780 x 540 x 250 mm / 30.71 x 21.26 x 9.84 in
Machine Weight: 14kg
Shipping Weight: 16.5kg
Maximum Print Speed: 150 mm/s
Maximum Commute Speed: 250mm/s
Build Volume:300 x 300 x 400 mm / 11.81 x 11.81 x 15.75 in
Extruder Type: Titan Extruder (Direct Drive)
Power Requirement: 110V
600W max (with heated bed turned on)
Connectivity:USB, TF Card, USB Stick
Keep an eye on Board: MKS Gen L
Nozzle Type:Volcano

Make sure this fits by entering your model number.
【Phenomenally Quiet】The powerful power brought by the TMC2209 stepper motor drive also significantly reduces the noise level, so that the artillery Sidewinder X2 fdm 3d printers has a hushed operating sound even working at fast speeds, not exceeding 50 decibels when working, good for home use, making you almost fail to remember it working.
【Intelligent power supply】Optimize the voltage range,100V-220V wide voltage switch. Combined with the upgraded AC hot bed cabel, can heat the hot bed to 230°F in 2 minutes. With built in thermal runaway protection, even though the board or the SSR malfunctioned, the bed won’t heat up without end, even bad things happen.
【Synchronized Dual Z System】There are 3 inductive sensor end stop one by one set on XYZ axis whilst those non-touch, high-precision limit switches can automatically calibrate and handle good stability under high-speed printing. Most importantly, features Synchronized Dual Z System greatly increase its printing stability.
【Self-developed motherboard】The self-developed 32-bit motherboard greatly stabilizes the printing speed, and print quality of the large artillery sidewinder X2 3d-printer; the print speed can reach up to 150 mm/s. Dynamic leveling compensation，intellisense 5*5 auto leveling, more accurate measurement of the inclination of the hot bed plane, to achieve better printing results for beginners.
【Upgrade Cable Manager】On the basis of 95% pre-assembled of SWX1, using injection jigs reinforces the in the past connected parts of the robin cable and the machine, making it less susceptible to damage, connection stable performance of SWX1 robbin cable is improved and easier to handle, and easier to install.