POE HAT FOR RASPBERRY PI
Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant
(Any Backward-Compatible Future Versions Will Be Supported As Well)
OLED for real-time monitoring temperature, IP, and fan status
The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Features At A Glance
-
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
-
PoE (Power Over Ethernet) capability,802.3af-compliant
-
Fully isolated switched-mode power supply (SMPS)
-
0.91″ OLED, for monitoring processor temperature, IP address, and fan status in real-time
-
Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch
-
Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins
Specifications
POE POWER INPUT |
37V ~ 57V DC in |
OLED SIZE |
0.91″ |
POE POWER OUTPUT |
5V 2.5A DC out |
OLED PIXELS |
128×32 |
NETWORK STANDARD |
802.3af PoE |
OLED DRIVER |
SSD1306 |
DIMENSIONS |
56.5 × 65mm |
OLED DISPLAY COLOR |
white |
For Use With Raspberry Pi 3B+/4B
Standard Raspberry Pi 40PIN GPIO Stackable Header, Allows Connecting Other HATs
Power Over Ethernet
Providing Both Network Connection And Power Supply For Your Raspberry Pi In One Cable
* proper 802.3af-compliant power sourcing equipment is required
0.91″ OLED Display
128 × 32 Pixels, I2C-Bus Controlled
Monitoring Processor Temperature, IP Address, Fan Status In Real-Time
Cooling Fan
Allows Auto Running On Powerup OR Programmable Control, Configured By Switch
Automatically Turn On/Off Depending On The Raspberry Pi Processor Temperature
Onboard PCF8574 Chip
PCF8574 IO Expander For I2C Bus, Providing 8 IO Pins, Of Which P0 For Fan Control
And Extra Spare Pins On Solder Pads (P1-P7, INT)
Pinout Definition
Outline Dimensions
Packing List :
1 x PoE HAT (B)
1 x Standoffs pack
(not include Raspberry Pi)
How to use
https://www.waveshare.com/wiki/PoE_HAT_(B)
J***k –
100% match with describtion, good quality of the product, quickly delivered.
J***k –
100% match with describtion, good quality of the product, quickly delivered.
J***k –
100% match with describtion, good quality of the product, quickly delivered.
A***y –
good!