UCTRONICS 0.96 Inch OLED Module 12864 128×64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for…

Name: UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED module
This OLED display module is small, only 0.96” diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you’re going to like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module may also be controlled by I2C.
That is, apart from the VCC and GND, 2 wires would be needed when the use of 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest how one can get an OLED into your project.

Features:
OLED self-luminous, no backlight
Size: 0.96”
Driver IC: SSD1306
Voltage: 3.3V-5V DC
Viewing angle: > 160°
High resolution: 128 x 64
Working Temperature: -30°C~70°C
Display: 2 rows of yellow, 6 rows of blue
Module Size: 27mmx 27mm x 4mm
Screen material: glass, need good protection
I2C Interface:
GND: Ground
VCC: 3.3V~5V
SCL: I2C Serial Clock (UNO: A5; MEGA: 21)
SDA: I2C Serial Data (UNO: A4; MEGA: 20)

Applications:
MP3, MP4, watch
Head-mounted displays
Meters and other intelligent instruments
Design any pretty patterns for your beloved electronic devices!

Package including:
1pcs UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED Display Module

Make sure this fits by entering your model number.
UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, and the like., the UNO shown in the picture is NOT INCLUDE
Resolution: 128 x 64, View angle: > 160°, Make stronger voltage: 3.3V-5V DC, Power consumption: 0.04W right through normal operation, full screen lit 0.08W
Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
Needn’t backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts rather readable
No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical Make stronger and software library in addition to the guide book in the package